海波科兹表面技术有限公司

Zinc plating

产品名称性能特点

1.It is suitable for low-and middle cyanide zinc plating.
2.The deposits are bright and it has excellent covering and throwing power and metal distribution.
3.The process has high tolerance of contaminations and it can be easily operated.
4.The thickness of the deposits is uniform and it can be easily chromated.
5.The process has only single part and it is suitable for both barrel and still operations.

1.It contains no cyanide and it is up to the mustard of national environment protection.
2.The process has only single part and it can be easily operated.
3.The deposits are bright and it has excellent covering and throwing power and metal distribution. And former cyanide zinc process can be transferred to this process easily.
4.The thickness of the deposits is uniform and it can be easily chromated.

1.Non-cyanide system meets the standard of National Enviroment Protection.
2. Double additives A and B parts.Brightness and covering power of deposits can be adjusted as required.
3.Deposits are bright and ductile,good metal distrution with excellent covering and throwing power.Previous cyanide zinc bath can be easily converted.
4.Uniform thickness and suitable to operate on rack and bareel.
5.Suitable for iridescent black and military-green passivation.

1.The process has low foam and it is suitable for both barrel and still operation.
2.If the process is used to plate zinc on complex parts, air agitation can be used.
3. The deposits are bright and it has excellent covering and throwing power and metal distribution.
4. The process has A and B two parts. The brightness and covering power of the deposits can be adjusted as required.
5.The passivation layer on the deposits is uniform and fresh.

1.The process has only single part and it can be easily operated.
2.The deposits are bright and it has excellent covering and throwing power and metal distribution.
3.The process is stable and it has a wide range of operating temperature.
4.The thickness of the deposits is uniform and it can be easily chromated.

1.The process has A and B two parts. The brightness and covering power of the deposits can be adjusted as required.
2.The deposits are bright and it has excellent covering and throwing power and metal distribution.
3.The process is stable and it has a wide range of operating temperature.
4.The thickness of the deposits is uniform and it can be easily chromated.

1.It is suitable for high speed zinc plating on parts like wire, strip and tube etc.
2.The process has a high current efficiency and the deposits have good adhesion and ductibility.
3.The process is stable and can be easily operated.